director 2/64 service manual

3–18 director 2/64 service manual
Repair Information
An HAFM status bar at the bottom left corner of the view window displays colored
icons (green circle, yellow triangle, red and yellow diamond, or gray square) that
indicate the most degraded or critical status of any managed product, fabric, or the
HAFM server. Messages display as required to the right of the colored icons.
By double-clicking a fabric icon or right-clicking a fabric icon and selecting from
menu options, a user opens the Product Manager application for the element.
Zone Set View
To open the Zone Set View from the main HAFM or Products View, choose the
Fabrics tab. In the left pane of the Fabrics View window, select the fabric of which
the director is a member. The Fabrics View (Topology) displays with the default
Topology tab active. choose the Zone Set tab at the bottom of the window. The Zone
Set View displays with the active zone set shown, as shown in Figure 3–11.
The view displays an expanded (or collapsed) list of the active zone set, including all
zones and zone members. The active zone set name of the fabric selected in the fabrics
window on the left displays at the top of the list, followed by zone names, followed by
zone members for each zone name. The table at the top of the view indicates if the
default zone is enabled or disabled.
Figure 3–11: Zone Set View