director 2/64 service manual

director 2/64 service manual 3–29
Repair Information
• If the port is an E_Port, the pop-up displays E_Port.
• If the port is segmented, the pop-up displays Segmented E_Port.
Click a port bar graph to display statistics values for the port (bottom half of the
Performance View). Right-click a port bar graph to display statistics values for the
port (bottom half of the Performance View) and access a menu to:
•Open the Port Properties, Node Properties, or Port Technology dialog boxes.
• Block or unblock the port.
• Enable or disable port beaconing.
• Perform port diagnostics.
• Enable or disable port channel wrapping. This menu option displays only when
the director is configured for S/390 operating mode.
• Swap one Fibre Channel port address with another. This menu option displays
only when the director is configured for S/390 operating mode.
• Clear link incident alerts.
• Reset the port.
• Configure port binding.
• Clear threshold alerts.
When a port is selected, the bottom half of the Performance View displays the
following tables of cumulative port statistics and error count values. These statistics
correspond to values defined in the Fabric Element management information base
(MIB).
• Traffic statistics.
• Class 2 statistics.
• Class 3 statistics.
• Error statistics.
Click Refresh to update statistical information displayed on the Performance View
for the selected port. Click Clear to reset the cumulative value counts to zero on the
Performance View for the selected port. A confirmation dialog box displays before
the values are cleared.