director 2/64 service manual

3–42 director 2/64 service manual
Repair Information
• Resets the Ethernet local area network (LAN) interface on the active CTP2 card,
causing the connection to the HAFM server to drop momentarily until the
connection automatically recovers.
• Automatically enables changes to an active zone configuration.
• Keeps all fabric logins, name server registrations, and operating parameters intact.
• Automatically sets the director online. The blocked or unblocked state of each
port remains intact.
To IPL the director:
1. At the HAFM server, open the HAFM application. The Products View displays.
2. Double-click the icon representing the director to be IPLed. The Hardware View
for the selected director displays.
3. Click Maintenance and choose IPL. The Information dialog box displays, as
shown in Figure 3–21.
Figure 3–21: Information dialog box
4. Click Yes to IPL the director. During the IPL, the director-to-HAFM server
Ethernet link drops momentarily and the following occur at the Product Manager
application:
— As the network connection drops, the Director 2/64 Status table turns yellow,
the Status field displays No Link, and the State field displays a reason
message.
—In the Products View, the director icon displays a gray square, indicating
director status is unknown.
— Illustrated FRUs in the Hardware View disappear, and display again as the
connection is reestablished.