director 2/64 service manual

director 2/64 service manual 3–45
Repair Information
Block a Port
To block an individual director port:
1. Notify the customer the port will be blocked. Ensure the customer’s system
administrator quiesces Fibre Channel frame traffic through the port and sets the
attached device offline.
2. At the HAFM server, open the HAFM application. The Products View displays.
3. Double-click the icon representing the director for which a port will be blocked.
The Hardware View for the selected director displays.
4. Double-click the UPM card for which a port will be blocked. The Port Card
View for the selected card displays.
5. Move the cursor over the port to be blocked and right-click the mouse to open a
list of menu options.
6. Choose Block Port. The Blocking Port warning box displays, as shown in
Figure 3–24.
Figure 3–24: Blocking Port warning box
7. Click OK. The following occur to indicate the port is blocked (and offline):
— The emulated green LED associated with the port extinguishes at the Port
Card View.
— The green LED associated with the port extinguishes at the director.
— A check mark displays in the check box adjacent to the Block Port menu
option.
8. Click Back to Full View to return to the Hardware View.