director 2/64 service manual

3–46 director 2/64 service manual
Repair Information
Block a UPM Card
To block all four ports on a director UPM card:
1. Notify the customer the UPM card will be blocked. Ensure the customer’s system
administrator quiesces Fibre Channel frame traffic through the ports and sets
attached devices offline.
2. At the HAFM server, open the HAFM application. The Products View displays.
3. Double-click the icon representing the director for which a UPM card will be
blocked. The Hardware View for the selected director displays.
4. Double-click the UPM card to be blocked. The Port Card View for the selected
card displays.
5. Move the cursor over the UPM card to be blocked (but not over an individual port)
and right-click the mouse to open a list of menu options.
6. Choose Block All Ports. The Block All Ports dialog box displays, as shown in
Figure 3–25.
Figure 3–25: Block All Ports dialog box
7. Click Yes. The following occur to indicate the UPM card is blocked (and offline):
— Emulated green LEDs associated with all four ports extinguish at the Port
Card View.
— Green LEDs associated with all four ports extinguish at the director.
8. Click Back to Full View to return to the Hardware View.
Unblock a Port
To unblock an individual director port:
1. At the HAFM server, open the HAFM application. The Products View displays.
2. Double-click the icon representing the director for which a port will be unblocked.
The Hardware View for the selected director displays.