director 2/64 service manual

director 2/64 service manual 3–47
Repair Information
3. Double-click the UPM card for which a port will be unblocked. The Port Card
View for the selected card displays.
4. Move the cursor over the port to be unblocked and right-click the mouse to open a
list of menu options.
5. Choose Block Port. Note the check mark in the box adjacent to the menu item,
indicating the port is blocked. The Unblocking Port warning box displays, as
shown in Figure 3–26.
Figure 3–26: Unblocking Port warning box
6. Click OK. The following occur to indicate the port is unblocked (and online):
— The emulated green LED associated with the port illuminates at the Port
Card View.
— The green LED associated with the port illuminates at the director.
— The check box adjacent to the Block Port option becomes blank.
7. Click Back to Full View to return to the Hardware View.
Unblock a UPM Card
To unblock all four ports on a director UPM card:
1. At the HAFM server, open the HAFM application. The Products View displays.
2. Double-click the icon representing the director for which an UPM card will be
unblocked. The Hardware View for the selected director displays.
3. Double-click the UPM card to be unblocked. The Port Card View for the selected
card displays.
4. Move the cursor over the UPM card to be unblocked (but not over an individual
port) and right-click the mouse to open a list of menu options.
5. Choose Unblock All Ports. The Unblock All Ports dialog box displays, as shown
in Figure 3–27.