director 2/64 service manual

3–54 director 2/64 service manual
Repair Information
As the download begins, a Writing data to FLASH message displays at the
top of the dialog box, followed by a Sending Files message. This message
remains as a progress bar travels across the dialog box to show percent completion
of the download. The bar progresses to 50% when the last file is transmitted to the
first CTP2 card. The bar remains at the 50% point until the director performs an
IPL (indicated by an IPLing message). During the IPL, the director-to-HAFM
server link drops momentarily and the following occur at the Product Manager:
— As the network connection drops, the Director 2/64 Status table turns yellow,
the Status field displays No Link, and the State field displays a reason
message.
—In the Products View, the director icon displays a gray square, indicating
director status is unknown.
— Illustrated FRUs in the Hardware View disappear, and display again as the
connection is reestablished.
After the IPL, a Synchronizing CTPs message displays. This message
remains as files are transmitted to the second CTP2 card and the progress bar
travels across the dialog box to 100%. When the download reaches 100%, a Send
Firmware Complete message displays, as shown in Figure 3–33.
Figure 3–33: Send Firmware Complete dialog box
8. Click Close to close the dialog box.
9. Click Close.
Manage Configuration Data
The Product Manager application provides maintenance options to back up, restore,
or reset the configuration files stored in nonvolatile random-access memory
(NV-RAM) on both director CTP2 cards. Configuration data in the file include:
• Identification data (director name, description, and location).
• Port configuration data (port names, blocked states, extended distance settings).