director 2/64 service manual

director 2/64 service manual 3–55
Repair Information
• Operating parameters (buffer-to-buffer credit (BB_Credit) value, error-detect
time-out value (E_D_TOV), resource allocation time-out value (R_A_TOV),
switch priority, and preferred domain ID).
• Simple network management protocol (SNMP) configuration information,
including trap recipients, community names, and write authorizations.
• Zoning configuration information, including the active zone set and default zone
state.
The backup file is not required in a redundant director, however the feature is
available and may be useful to save a special-purpose configuration for test. The
director must be set offline prior to restoring or resetting the configuration file.
Backup the Configuration
To backup the director configuration file to the HAFM server:
1. At the HAFM server, open the HAFM application. The Products View displays.
2. Double-click the icon representing the director for which the configuration file
will be backed up. The Hardware View for the selected director displays.
3. Click Maintenance and choose Backup & Restore Configuration. The Backup
and Restore Configuration dialog box displays, as shown in Figure 3–34.
Figure 3–34: Backup and Restore Configuration dialog box
4. Click Backup. When the backup process finishes, the Backup Complete dialog
box displays, as shown in Figure 3–35.
Figure 3–35: Backup Complete dialog box
5. Click OK to close the dialog box and return to the Hardware View.