director 2/64 service manual

3–56 director 2/64 service manual
Repair Information
Restore the Configuration
To restore the director configuration file from the HAFM server:
1. Notify the customer the director will be set offline. Ensure the customer’s system
administrator quiesces Fibre Channel frame traffic through the director and sets
attached devices offline.
2. Set the director offline (Set Offline State on page 3–44).
3. At the HAFM server, open the HAFM application. The Products View displays.
4. Double-click the icon representing the director for which the configuration file
will be restored. The Hardware View for the selected director displays.
5. Click Maintenance and choose Backup & Restore Configuration. The Backup
and Restore Configuration dialog box displays, as shown in Figure 3–36.
Figure 3–36: Backup and Restore Configuration dialog box
6. Click Restore. A Warning message box displays, as shown in Figure 3–37.
Figure 3–37: Warning dialog box
7. Click Yes. When the restore process finishes, the Restore Complete dialog box
displays, as shown in Figure 3–38.
Figure 3–38: Restore Complete dialog box