director 2/64 service manual

director 2/64 service manual 3–57
Repair Information
8. Click OK to close the dialog box and return to the Hardware View.
Reset Configuration Data
NOTE: This procedure resets the director IP address to the default value of 10.1.1.10 and may
disrupt HAFM server-to-director communication. All configured feature (PFE) keys must be
re-entered.
To reset director data to the factory default settings:
1. Notify the customer the director will be set offline. Ensure the customer’s system
administrator quiesces Fibre Channel frame traffic through the director and sets
attached devices offline.
2. Set the director offline (Set Offline State on page 3–44).
3. At the HAFM server, open the HAFM application. The Products View displays.
4. Double-click the icon representing the director for which the configuration file
will be reset to factory default settings. The Hardware View for the selected
director displays.
5. Click Maintenance and choose Reset Configuration. The Reset Configuration
dialog box displays, as shown in Figure 3–39.
Figure 3–39: Reset Configuration dialog box
6. Click Reset. When the process completes, the dialog box closes and the
application returns to the Hardware View.
Install or Upgrade Software
This section describes the procedure to install or upgrade the HAFM application to the
HAFM server. The HAFM application includes the Director 2/64 Product Manager
and HAFM Services applications.