director 2/64 service manual

director 2/64 service manual 4–29
FRU Removal and Replacement
14. If required, clear the amber system error LED on the director bezel:
a. At the Hardware View, right-click the front panel bezel graphic (away from a
FRU) to open a menu.
b. Click Clear System Error Light.
RRP: Backplane
Use the following procedures to remove or replace the backplane. A list of tools
required is provided.
Tools Required
The following tools are required to perform these procedures.
• Torque tool and hex adapter (provided with the director).
• Standard flat-tip screwdriver.
• Standard cross-tip (Phillips) screwdriver.
• ESD grounding cable and wrist strap.
• Maintenance terminal (desktop or notebook PC) with:
— The Microsoft Windows 98, Windows
2000, Windows Millennium Edition, or
Windows XP.
— RS-232 serial communication software (such as ProComm Plus or
HyperTerminal). HyperTerminal is provided with Windows operating
systems.
• Asynchronous RS-232 null modem cable (provided with the director).
Removing a Backplane
To remove the backplane:
1. At the Hardware View, double-click the graphic representing the director bezel
(do not click a graphical FRU) to open the Director Properties dialog box.
Record the director serial number. This number must be programmed into the
replacement backplane.
If the director is not communicating with the HAFM server (Director Properties
dialog box is not available), obtain the serial number while performing step 5.