director 2/64 service manual

Are you sure you want
to remove all members
from this zone?
All members will be
deleted from the
selected zone.
Click Yes to delete the
members or No to cancel the
operation.
Cannot add a switch to
a zone.
The device that you
are attempting to add
to the zone is a switch,
which cannot be
added to a zone.
Specify the port number or
corresponding World Wide
Name for the device you want
to add to the zone.
Cannot connect to
HAFM server.
The HAFM
application
at a remote
workstation could not
connect to the HAFM
server.
Verify the HAFM server internet
protocol (IP) address is valid.
Cannot delete product. The selected product
cannot be deleted.
Verify the HAFM
server-to-product link is up.
• If the link is up, the HAFM
server may be busy.
• Another Product Manager
instance may be open.
• The user may not have
permission to delete the
product.
Cannot disable Fabric
Binding while
Enterprise Fabric
Mode is active.
User attempted to
disable Fabric Binding
through the Fabric
Binding dialog box,
but Enterprise Fabric
Mode was enabled.
Disable Enterprise Fabric Mode
through the Enterprise Fabric
Mode dialog box in HAFM
before disabling Fabric Binding.
Cannot display route.
No active zone
enabled.
You cannot show the
route through a fabric
with no active zone.
Enable the default zone or
activate a zone set before
attempting to show the route.
Table A–1: HAFM Messages (Continued)
Message Description Action