director 2/64 service manual

Fabric Log will be lost
once the fabric
unpersists. Do you
want to continue?
When you unpersist a
fabric, the
corresponding fabric
log is deleted.
Click Yes to unpersist the fabric
or No to cancel the operation.
Fabric member could
not be found.
A fabric member does
not exist when the
application prepared to
find a route, find a
route node, or gather
route information on
that fabric member.
Ensure the product is
incorporated into the fabric and
retry the operation. If the
problem persists, contact the
next level of support.
Fabric not persisted. The user attempted to
refresh or clear the
Log dialog, after a
fabric was unpersisted.
When you unpersist a
fabric, the
corresponding fabric
log is deleted.
Clear the log dialog after the
fabric is unpersisted.
Field cannot be blank. The data field requires
an entry and cannot
be left blank.
Enter appropriate information
in the data field.
Field has exceeded
maximum number of
characters.
The maximum number
of data entry
characters allowed in
the field was
exceeded.
Enter the information using the
proscribed number of
characters.
File transfer aborted. The user aborted the
file transfer process.
Verify the file transfer is to be
aborted, then click OK to
continue.
HAFM error <error
number 1 through 8 >.
The HAFM
application
encountered an
internal error (1
through 8 inclusive)
and cannot continue
operation.
Contact the next level of
support to report the problem.
Table A–1: HAFM Messages (Continued)
Message Description Action