director 2/64 service manual

No user selected. A user was not
selected when the
command was
attempted.
Choose a user and try again.
No zone member
selected.
A zoning operation
was attempted without
a zone member
selected.
Choose a zone member and try
the operation again.
No zone selected. A zoning operation
was attempted without
a zone selected.
Choose a zone and try the
operation again.
No zone selected or
zone no longer exists.
A zoning operation
was attempted without
a zone selected, or the
zone selected no
longer exists in the
fabric.
Choose a zone and try the
operation again.
No zone set active. A zone set cannot be
deactivated if there are
no active zones.
Informational message
only—no action is required.
No zone set selected. A zoning operation
was attempted without
a zone set selected.
Choose a zone set and try the
operation again.
No zone set selected
or zone set no longer
exists.
A zoning operation
was attempted without
a zone set selected, or
the zone set you
selected no longer
exists in the fabric.
Choose a zone set and try the
operation again.
Only attached nodes
can be displayed in
this mode.
Users cannot display
unused ports when
adding ports by
world-wide name.
Change the add criteria to Add
by Port.
Table A–1: HAFM Messages (Continued)
Message Description Action