director 2/64 service manual

Password and
confirmation don’t
match.
Entries in the
password field and
confirmation password
field do not match. The
entries are case
sensitive and must be
the same.
Enter the password and
confirmation password again.
Product Manager
instance is currently
open.
A product cannot be
deleted while an
instance of the Product
Manager
application is
open.
Close the Product Manager
application, then delete the
product.
Remote sessions are
not allowed from this
network address.
Only IP addresses of
remote workstations
specified at the
Session Options
dialog box are allowed
to connect to the
HAFM server.
Consult with the customer’s
network administrator to
determine if the IP address is to
be configured for remote
sessions.
Remote session
support has been
disabled.
The connection
between the specified
remote workstation
and the HAFM server
was disallowed.
Consult with the customer’s
network administrator to
determine if the workstation
entry should be modified at the
Session Options dialog box.
Resource is
unavailable.
The specified
operation cannot be
performed because
the product is
unavailable.
Verify the HAFM
server-to-product link is up. If
the link is up, the HAFM server
may be busy. Try the operation
again later.
Route data corrupted. The information for this
route is corrupt.
Try the operation again. If the
problem persists, contact the
next level of support.
Route request timeout. The Show Route
request timed out.
Try the operation again. If the
problem persists, contact the
next level of support.
Table A–1: HAFM Messages (Continued)
Message Description Action