director 2/64 service manual

Routing is not
supported by the
switch.
This switch or director
does not support the
Show Routes feature.
Choose a different switch or
director to show the route.
SANtegrity Feature not
installed. Please
contact your sales
representative.
User selected Fabric
Binding or Enterprise
Fabric Mode from the
Fabrics menu, but the
SANtegrity feature was
not installed.
Install the SANtegrity feature to
use Fabric Binding or enable
Enterprise Fabric Mode.
Select alias to add to
zone.
An alias was not
selected before
clicking Add.
Choose an alias before clicking
Add.
Selection is not a
World-Wide Name.
The selection made is
not a world-wide
name.
Choose a valid world-wide
name before performing this
operation.
Server shutting down. The HAFM
application
is closing and
terminating
communication with
the attached product.
Reboot the HAFM server. If the
problem persists, contact the
next level of support.
SNMP trap address
not defined.
If an SNMP community
name is defined, a
corresponding SNMP
trap recipient address
must also be defined.
Enter a corresponding SNMP
trap recipient address.
Switch is not managed
by HAFM.
The selected switch or
director is not
managed by the
HAFM
application.
Choose a different switch or
director.
The Administrator user
cannot be deleted.
The administrator user
is permanent and
cannot be deleted from
the Configure Users
dialog box.
Informational message
only—no action is required.
Table A–1: HAFM Messages (Continued)
Message Description Action