director 2/64 service manual

The maximum number
of remote network
addresses has already
been configured.
A maximum of four IP
addresses for remote
workstations can be
configured at the
Session Options
dialog box. That
number was reached.
Delete an existing IP address
before adding a new IP
address.
The maximum number
of users has already
been configured.
The number of users
(32) that can be
defined to the HAFM
application was
reached.
Delete an existing user before
adding a new user.
The maximum number
of zones allowed has
already been
configured.
The maximum number
of zones that can be
defined was reached.
Delete an existing zone before
adding a new zone.
The maximum number
of zone sets has
already been
configured.
The maximum number
of zone sets that can
be defined was
reached.
Delete an existing zone set
before adding a new zone set.
The maximum number
of zones per zone set
has already been
configured.
The maximum number
of zones that can be
defined in a zone set
was reached.
Delete an existing zone before
adding a new zone to the zone
set.
The nickname does
not exist.
The entered nickname
does not exist in the
fabric.
Configure the nickname to the
appropriate product or select
an existing nickname.
The nickname is
already assigned.
Either use a different
name or do not save
the name as a
nickname.
The entered nickname
already exists in the
fabric. Each nickname
must be unique.
Define a different nickname.
Table A–1: HAFM Messages (Continued)
Message Description Action