director 2/64 service manual

Zones configured with
port numbers are
ignored in Open Fabric
Mode.
While in Open Fabric
mode, zones
configured using port
numbers are enforced
through world-wide
names.
Informational message only -
no action is required.
Zones must be defined
before creating a zone
set.
You cannot create a
zone set without any
zones defined for
HAFM.
Define zones using the New
Zone dialog box.
Zoning by port number
is ignored in Open
Fabric Mode.
While in Open Fabric
mode, zones
configured using port
numbers are enforced
through world-wide
names.
Informational message only -
no action is required.
Zoning by port number
is not supported in
Open Fabric Mode.
You cannot specify an
item for zoning by port
number if HAFM is in
Open Fabric Mode.
Define zones by WWN of
device.
Zoning name already
exists.
Duplicate zone names
are not allowed in the
zoning library.
Modify (to make it unique) or
delete the duplicate zone
name.
Table A–1: HAFM Messages (Continued)
Message Description Action