director 2/64 service manual

Director 2/64 Product Manager Messages
This section lists Director 2/64 Product Manager information and error messages in
alphabetical order.
Table A–2: Product Manager Messages
Message Description Action
A Product Manager
instance is already
open.
Only one instance of
the Product Manager
application can be
open at one time.
Close the open Product
Manager
application so the
desired instance of the
Product Manager
application
can be opened.
All FPM ports will be
held inactive while
the director is
configured to
2 Gb/sec speed. Do
you want to continue?
Occurs when FPM
cards are installed in
the director and
director speed is
being set to 2 Gb/sec
in the Configure
Operating
Parameters dialog
box.
Replace FPM cards with
UPM cards (UPM cards
operate at 1 and 2 Gb/sec) or
set the director speed to
1 Gb/sec.
All port names must
be unique.
A duplicate Fibre
Channel port name
was configured. All
port names must be
unique.
Reconfigure the Fibre
Channel port with a unique
name.
Another Product
Manager is currently
performing a
firmware install.
Only one instance of
the Product Manager
application can install
a firmware version to
the director at a time.
Wait for the firmware
installation process to
complete and try the
operation again.
Are you sure you
want to delete
firmware version?
This message
requests confirmation
to delete a firmware
version from the
HAFM server’s
firmware library.
Click Yes to delete the
firmware version or No to
abort the operation.