director 2/64 service manual

Device applications
should be terminated
before starting
diagnostics. Press
NEXT to continue.
Port diagnostics
(loopback tests)
cannot be performed
on a port while an
attached device
application is
running.
Terminate the device
application and perform
diagnostics again.
Director clock alert
must be cleared
before enabling
period
synchronization.
Clock alert mode is
enabled through the
Configure FICON
Management Sever
dialog box, and user
is attempting to
enable Periodic
Date/Time
Synchronization
through the
Configure Date and
Time dialog box.
Disable clock alert mode
through the Configure
FICON Management Server
dialog box.
Director must be
offline to configure.
The director must be
set offline prior to
configuring Fibre
Channel operating
parameters.
Set the director offline,
reconfigure parameters at the
Configure Operating
Parameters dialog box, and
retry the operation.
Do you want to
continue with IPL?
This message
requests confirmation
to initial program load
(IPL) the director.
Click OK to IPL the director or
No to cancel the operation.
Duplicate Community
names require
identical write
authorizations.
Duplicate community
names are entered at
the Configure SNMP
dialog box, and have
different write
authorizations.
Delete the duplicate
community name or make the
write authorizations
consistent.
Table A–2: Product Manager Messages (Continued)
Message Description Action