director 2/64 service manual

Invalid port address. An invalid port
address has been
entered.
Verify port address through
the Configure Addresses -
“Active” dialog box (S/390
mode only) and re-enter.
Invalid port number. The Fibre Channel
number entered is
invalid. The port
number must be an
integer from 0
through 63 inclusive.
Verify and enter a valid port
number.
Invalid response
received from
director.
An error occurred at
the director during a
firmware download
operation.
Retry the firmware download
operation. If the problem
persists, contact the next
level of support.
Invalid HAFM server
address.
The IP address
specified for the
HAFM server is
unknown to the
domain name server
(invalid).
Verify and enter a valid HAFM
server IP address.
Invalid UDP port
number.
The specified user
datagram protocol
(UDP) port number is
invalid. The number
must be an integer
from 1 through 65535
inclusive.
Verify and enter a valid UDP
port number.
Invalid value for
BB_Credit.
At the Configure
Operating
Parameters dialog
box, the
buffer-to-buffer credit
(BB_Credit) value
must be an integer
from 1 through 60
inclusive.
Verify and enter a valid
number.
Table A–2: Product Manager Messages (Continued)
Message Description Action