director 2/64 service manual

Log is currently in
use.
Access to the log is
denied because the
log was opened by
another instance of
the Product Manager
application.
Retry the operation later. If
the condition persists, contact
the next level of support.
Maximum number of
versions already
installed.
The number of
firmware versions
that can be defined to
the HAFM
application’s firmware
library was reached.
Delete an existing firmware
version before adding a new
version.
No file was selected. Action requires the
selection of a file.
Choose a file.
No firmware versions
to delete.
There are no
firmware versions in
the firmware library to
delete, therefore the
operation cannot be
performed.
Informational message
only—no action is required.
No firmware version
was selected.
A file was not
selected in the
Firmware Library
dialog box before an
action, such as
modify or send, was
performed.
Click on a firmware version in
the dialog box to select it,
then perform the action again.
Nonredundant
director must be
offline to install
firmware.
If the director has
only one CTP2 card,
the director must be
set offline to install a
firmware version.
Set the director offline and
install the firmware.
Table A–2: Product Manager Messages (Continued)
Message Description Action