director 2/64 service manual

Performing this
action will overwrite
the date/time on the
director.
Warning that occurs
when configuring the
date and time
through the
Configure Date and
Time dialog box, that
the new time or date
will overwrite the
existing time or date
set for the director.
Verify that you want to
overwrite the current date or
time.
Performing this
operation will change
the current state to
Offline.
This message
requests confirmation
to set the director
offline.
Click OK to set the director
offline or Cancel to cancel the
operation.
Performing this
operation will change
the current state to
Online.
This message
requests confirmation
to set the director
online.
Click OK to set the director
online or Cancel to cancel the
operation.
Periodic Date/Time
synchronization must
be cleared.
Action cannot be
performed because
Periodic Date/Time
Synchronization
option is active.
Click Periodic Date/Time
Synchronization check box
in Configure Date and Time
dialog box (Configure menu)
to clear check mark and
disable periodic date/time
synchronization.
Port cannot swap to
itself.
Port addresses
entered in the Swap
Ports dialog box are
the same.
Ensure that address in the
first and second port address
fields are different.
Port diagnostics
cannot be performed
on an inactive port.
This displays when
port diagnostics are
run on a port that is in
an inactive state.
Run the diagnostics on an
active port.
Table A–2: Product Manager Messages (Continued)
Message Description Action