director 2/64 service manual

The add firmware
process has been
aborted.
The user aborted the
process to add a
firmware version to
the HAFM server’s
firmware library.
Verify the firmware addition is
to be aborted, then click OK
to continue.
The data collection
process failed.
An error occurred
while performing the
data collection
procedure.
Try the data collection
procedure again. If the
problem persists, contact the
next level of support.
The data collection
process has been
aborted.
The user aborted the
data collection
procedure.
Verify the data collection
procedure is to be aborted,
then click OK to continue.
The director did not
accept the request.
The director cannot
perform the
requested action.
Retry the operation. If the
condition persists, contact the
next level of support.
The director did not
respond in the time
allowed.
While waiting to
perform a requested
action, the director
timed out.
Retry the operation. If the
condition persists, contact the
next level of support.
The director is busy
saving maintenance
information.
The director cannot
perform the
requested action
because it is busy
saving maintenance
information.
Retry the operation later. If
the condition persists, contact
the next level of support.
The director must be
offline to configure.
This configuration
task requires the
director to be offline.
Take the director offline and
retry the action.
The Ethernet link
dropped.
The Ethernet
connection between
the HAFM server and
the director is down
or unavailable.
Establish and verify the
network connection.
The firmware file is
corrupted.
A firmware version
file is corrupt.
Contact the next level of
support to report the problem.
Table A–2: Product Manager Messages (Continued)
Message Description Action