director 2/64 service manual

B–36 director 2/64 service manual
Event Code Tables
Event Code: 430
Message: Excessive Ethernet transmit errors.
Severity: Informational.
Explanation: Transmit error counters for the active CTP2 card Ethernet adapter (sum of all counters)
exceeded a threshold. This does not indicate a CTP2 card failure; it indicates a problem
with the Ethernet cable, hub, or device on the same Ethernet segment. Event data
counters are represented in hexadecimal format with the least significant byte first.
Action: Verify the Ethernet cable, hub, and other devices are properly connected and
operational.
Event Data: Bytes 0 through 3 = sum of all transmit errors (total_xmit_error).
Bytes 4 through 7 = frame count where Ethernet adapter does not detect carrier sense
at preamble end (loss_of_CRSs_cnt).
Bytes 8 through 11 = frame count where Ethernet adapter does not detect a collision
within 64 bit times at transmission end (SQE_error_cnt).
Bytes 12 through 15 = frame count where Ethernet adapter detects a collision more than
512 bit times after first preamble bit (out_of_window_cnt). Frame not transmitted.
Bytes 16 through 19 = frame count where transmission is more than 26 ms (jabber_cnt).
Frame not transmitted.
Bytes 20 through 23 = frame count where Ethernet adapter encounters 16 collisions
while attempting to transmit a frame (16coll_cnt). Frame not transmitted.
Distribution: Director HAFM Server Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call
Home
Sense
Info
Link
Incident
✔✔