director 2/64 service manual

director 2/64 service manual B–43
Event Code Tables
Event Code: 453
Message: New feature key installed.
Severity: Informational.
Explanation: This event occurs when a new feature key is installed from the HAFM Server or
Embedded Web Server interface. The director performs an IPL when the feature key is
enabled. Event data indicates which feature or features are installed.
Action: No action required.
Event Data: Byte 0 = feature description as follows: 00 through 04 = Flexport, 06 = open-system
management server.
Byte 1 = feature description as follows: 06 = SANtegrity.
Distribution: Director HAFM Server Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call
Home
Sense
Info
Link
Incident
✔✔
Event Code: 460
Message: Management request out of range.
Severity: Informational
Explanation: This event occurs when requests passed from the managing tool (generally HAFM) to
the switch do not meet data boundary specifications. This event is most likely to be
triggered if a user attempt to activate a zone set that is larger than the maximum defined
zone set size.
Action: The director found request data from the management tool to be larger or smaller than
expected. The connection to the management tool will be temporarily lost. After the link
is re-established, verify that all information changed in the managing tool is within the
specified ranges. For example, verify that the zones and zone members in a zone set fall
within the limits stated in the user manual. Try sending the request again.
Event Data: None
Distribution: Director HAFM Server Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call
Home
Sense
Info
Link
Incident
✔✔