director 2/64 service manual

Diagnostics

This chapter describes diagnostic procedures used by service representatives to fault

isolate the Director 2/64 problems or failures to the field-replaceable unit (FRU) level.

The chapter describes how to perform the maintenance analysis procedures (MAPs).

Maintenance Analysis Procedures

NOTE: HAFM and Product Manager screens in this manual may not match the screens on your

server and workstation. The title bars have been removed and the fields may contain data that

does not match the data seen on your system.

Fault isolation and related service procedures are provided through MAPs. The

procedures vary depending on the diagnostic information provided. MAPs consist of

step-by-step procedures that prompt service personnel for information or describe a

specific action to be performed. MAPs provide information to interpret system events,

isolate a director failure to a single FRU, remove and replace the failed FRU, and

verify director operation.

Factory Defaults

Table 2–1 lists the defaults for the passwords, and IP, subnet, and gateway addresses.

Table 2–1: Factory-set Defaults

Item Default

Customer password password

Maintenance password level-2

IP address 10.1.1.10

Subnet mask 255.0.0.0

Gateway address 0.0.0.0