director 2/64 service manual

Quick Start
Table 2–2 lists the MAPs. Fault isolation normally begins at MAP 0000: Start MAP
on page 2–12.
However, Table 2–3 lists the event codes and the corresponding MAPs. It is a quick
start, if an event code is readily available.
Table 2–2: MAP Summary
MAP Page
MAP 0000: Start MAP 2–12
MAP 0100: Power Distribution Analysis 2–34
MAP 0200: POST Failure Analysis 2–44
MAP 0300: Console Application Problem
Determination
2–49
MAP 0400: Loss of Console Communication 2–55
MAP 0500: FRU Failure Analysis 2–68
MAP 0600: UPM Card Failure and Link Incident
Analysis
2–76
MAP 0700: Fabric, ISL, and Segmented Port
Problem Determination
2–95
MAP 0800: Console PC Problem Determination 2–108
Table 2–3: Event Codes Versus Maintenance Action
Event
Code Explanation Action
001 System power-down. Power on director.
010 Login server unable to
synchronize databases.
Go to MAP 0700: Fabric, ISL,
and Segmented Port Problem
Determination.
011 Login server database invalid. Go to MAP 0700: Fabric, ISL,
and Segmented Port Problem
Determination.
020 Name server unable to
synchronize databases.
Go to MAP 0700: Fabric, ISL,
and Segmented Port Problem
Determination.