director 2/64 service manual

director 2/64 service manual 2–7
Diagnostics
422 CTP2 firmware
synchronization complete.
No action required.
423 CTP2 firmware download
initiated.
No action required.
430 Excessive Ethernet transmit
errors.
Go to MAP 0400: Loss of
Console Communication.
431 Excessive Ethernet receive
errors.
Go to MAP 0400: Loss of
Console Communication.
432 Ethernet adapter reset. Go to MAP 0400: Loss of
Console Communication.
433 Non-recoverable Ethernet
fault.
Go to MAP 0500: FRU Failure
Analysis.
440 Embedded port hardware
failed.
Go to MAP 0500: FRU Failure
Analysis.
442 Embedded port anomaly
detected.
No action required.
450 Serial Number mismatch
detected.
No action required – any
configured Feature Keys will be
cleared, configuration
information will be synched
with the backplane VPD and
the CTP2 will automatically be
IPLed.
451 Switch speed incompatibility
detected.
No action required – Switch
speed configuration and port
speed configuration data will be
set to a level that is compatible
with the CTP2 and the CTP2
will automatically be IPLed.
Table 2–3: Event Codes Versus Maintenance Action (Continued)
Event
Code Explanation Action