director 2/64 service manual

director 2/64 service manual 2–9
Diagnostics
505 UPM card revision not
supported.
Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
506 Fibre Channel port failure. Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
507 Loopback diagnostics port
failure.
Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
508 Fibre Channel port anomaly
detected.
No action required.
510 SFP optical transceiver
hot-insertion initiated.
No action required.
512 SFP optical transceiver
nonfatal error.
Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
513 SFP optical transceiver
hot-removal completed.
No action required.
514 SFP optical transceiver failure. Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
581 Implicit incident. Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
582 Bit error threshold exceeded. Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
583 Loss of signal or loss of
synchronization.
Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
584 Not operational primitive
sequence received.
Go to MAP 0600: UPM Card
Failure and Link Incident
Analysis.
Table 2–3: Event Codes Versus Maintenance Action (Continued)
Event
Code Explanation Action