director 2/64 service manual

2–22 director 2/64 service manual
Diagnostics
Return to the MAP step that sent you here.
24
Are you at the director reporting the problem?
YES NO
↓ Go to step 36.
25
Is the power LED (green) at the director front bezel illuminated?
NO YES
↓ Go to step 30.
26
Is the director connected to facility AC power and powered on?
NO YES
↓ Go to step 29.
27
Connect the director to facility AC power and set the power switch (circuit breaker) at
the rear of the director to the ON (up) position. Inspect the director for indications of
being powered on, such as:
• At the front bezel, an illuminated power LED (green) or system error LED
(amber).
• An illuminated green LED on the active CTP2 card, and illuminated green PWR
OK LEDs on both power supplies.
• Audio emanations and airflow from cooling fans.
Is the director powered on?
YES NO