director 2/64 service manual

2–32 director 2/64 service manual
Diagnostics
Does the State field display a Failed message for any of the FRUs?
YES NO
↓ The director is operational. Exit MAP.
A FRU failure is indicated. Continue to the next step to obtain event codes. If no event
codes are found, go to MAP 0500: FRU Failure Analysis on page 2–68. Exit MAP.
52
Obtain event codes from the Embedded Web Server event log.
NOTE: If multiple event codes are found, note all codes and associated severity levels. Record
the date, time, and listed sequence, and determine if the codes are related to the reported
problem. Begin fault isolation with the most recent event code with the highest severity level.
Other codes may accompany this event code, or may indicate a normal indication after a
problem is recovered.
1. At the View panel, choose the Monitor option at the left side of the panel. The
Monitor panel opens with the Status page displayed.
2. At the Monitor panel, click the Log tab. The Monitor panel displays, as shown in
Figure 2–8.
3. Record the event code, date, time, and severity (Informational, Minor, Major, or
Severe).
4. Record all event codes that may relate to the reported problem.