embedded web server user guide

embedded web server user guide A–9
Error Messages
Error 73: Port Not
Installed
The port specified is not
installed on this product.
Consult the
installation/service
manual on installing a
port optic.
Error 74: Invalid
Number of Zones
The specified zone set
contains less than one zone
or more than the maximum
number of zones allowed for
this product.
A zone set must contain
at least one zone to be
considered valid. Add or
remove zones
accordingly to meet
specified requirements.
Error 75: Invalid Zone
Set Size
The zone set entered
exceeds switch NVRAM
limitations.
Reduce the size of the
zone set to meet
specified requirements.
This can be a reduction
in the number of zones in
the zone set, a reduction
of members in a zone, or
a reduction of zone name
lengths.
Error 76: Invalid
Number of Unique
Zone Members
The zone entered contains
more than the maximum
number of zone members
allowed per zone set for this
product.
Reduce the number of
members in one or more
zones and re-submit the
command.
Error 77: Not Allowed
While Port Is Failed
The port selected is in a
failed or inactive state, or is
in need of service.
Consult the
installation/service
manual for appropriate
action.
Error 78: System Error
Light On
This unit is not able to
beacon because the system
error light is on.
You must clear the
system error light before
unit beaconing may be
enabled. Consult the
installation/service
manual for appropriate
action.
Message Description Action