embedded web server user guide

embedded web server user guide A–13
Error Messages
Error 135: Invalid
Number of Fabric
Membership List
Entries
The number of fabric
members submitted
exceeds the maximum
allowable entries of 31.
The number of entries in
the fabric membership
list is limited to the total
number of domain ID's
available to the fabric.
Make sure that the list
(including the managed
switch) contains no more
than 31 entries.
Error 136: Invalid
Number of Switch
Membership List
Entries
The number of switch
members submitted
exceeds the maximum
allowable entries of 256.
The number of entries in
the switch membership
list is limited to 256.
Make sure that the list
(including the managed
switch) contains no more
than 256 entries.
Error 137: Invalid Fabric
Binding State
The fabric binding state
submitted is not recognized
by the CLI.
The fabric binding state
must be set to either
inactive or restrict.
Error 138: Invalid
Switch Binding State
The switch binding state
submitted is not recognized
by the CLI.
The switch binding state
must be set to one of the
following: disable,
erestrict, frestrict, or
allrestrict.
Error 139: Insistent
Domain ID's Must Be
Enabled When Fabric
Binding Active
The user attempted to
disable insistent domain
ID's while fabric binding was
active.
Insistent domain ID's
must remain enabled
while fabric binding is
active. If fabric binding is
set to inactive, the
insistent domain ID state
may be changed. It
should be noted,
however, that this can be
disruptive to the fabric.
Error 140: Invalid
Insistent Domain ID
State
The request cannot be
completed because an
invalid insistent domain ID
state has been submitted.
The insistent domain ID
state must be set to
either enable or disable.
Message Description Action