embedded web server user guide

A–18 embedded web server user guide
Error Messages
Error 214: A Zone
Contains Zero
Members
You are attempting to
activate a zone set that
contains at least one zone
with zero members.
Each zone in the zone
set must contain at least
one member. Add a valid
member to the empty
zone and re-submit.
Error 215: Zone Set
Size Exceeded
The local work area zone
set has outgrown the size
limitations imposed by the
Command Line Interface.
Reduce the size of the
zone set to meet CLI
requirements. This can
be a reduction in the
number of zones in the
zone set, a reduction of
members in a zone, or a
reduction of zone name
lengths.
Error 218: Invalid Port
Number
The value entered for the
port number is invalid
Enter a port number
within the range
supported by your
Director or Switch. Valid
values are:
• 0–15 for the Edge
Switch 2/16
• 0-23 for the Edge
Switch 2/24
• 0–31 for the Edge
Switch 2/32
• 0–63 for the Director
2/64
• 0–127 and 132–144
for the Director 2/140
Error 219: Invalid Port
Typ e
The port type configured is
invalid.
A port may be configured
to be an eport, gport, or
fport. Be sure the port is
configured appropriately
and re-submit the
command. On the Edge
Switch 2/24 only, fxport
and gxport types are also
supported.
Message Description Action