embedded web server user guide

embedded web server user guide A–19
Error Messages
Error 222: Invalid
SNMP Community
Index
The value entered for the
SNMP community index is
invalid.
The SNMP community
index must be an integer
in the range 1–6. Make
the appropriate changes
and re-submit the
command.
Error 223: Unknown
Error
The switch did not accept
the request
Contact your service
representative.
Error 224: Invalid
Argument
One or more parameters
are invalid for this
command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 225: Argument
Does Not Contain All
USASCII Characters
Non-USASCII characters. For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 226: Argument Is
Too Long
One or more parameters
are invalid for this
command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 227: Invalid
SNMP Community
Name
The value entered for the
SNMP community name is
invalid
The community name
must not exceed 32
characters in length.
Duplicate community
names are allowed, but
corresponding write
authorizations must
match. Enter an
appropriate SNMP
community name and
re-submit.
Error 228: Invalid Write
Authorization Argument
The write authorization
parameter does not contain
a valid value.
Parameters must be
typed exactly to
specification to be
recognized correctly.
Message Description Action