embedded web server user guide

A–20 embedded web server user guide
Error Messages
Error 229: Invalid UDP
Port Number
The udpPortNum parameter
does not contain a valid
value.
Parameters must be
typed exactly to
specification to be
recognized correctly by
the CLI.
Error 230: Invalid WWN The wwn parameter does
not contain a valid value.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 231: Invalid Port
number
The portNum parameter
does not contain a valid
value.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 232: Invalid
Domain ID
The domainID parameter
does not contain a valid
value.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 233: Invalid
Member
The zone member added is
not valid.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Error 234: Invalid
Command
The cannot associate an
action with the submitted
command. The command
may be misspelled, required
parameters may be missing,
or the request may not be
applicable.
Consult the
documentation for the
command to be sure this
command was entered
correctly, all parameters
are valid and present,
and that the syntax is
correct.
Message Description Action