embedded web server user guide

embedded web server user guide 2–13
Configuring the Product
b. At the Subnet Mask field, type the new value specified by the customer’s
network administrator (default is 255.0.0.0).
c. At the Gateway Address field, type the new value specified by the customer’s
network administrator (default is 0.0.0.0).
3. Click Activate to save and activate the changes. The following message box
displays (Figure 2–7).
Figure 2–7: Network information message box
4. Update the address resolution protocol (ARP) table for the browser PC.
a. Choose the Exit option from the File menu to close the Embedded Web
Server and browser applications. The Windows desktop displays.
b. At the Windows desktop, click Start at the left side of the task bar. The
Windows Workstation menu displays.
c. At the Windows Workstation menu, sequentially choose the Programs and
Command Prompt options. (Depending on which Windows operating
system is used, you may need additional steps to access the Command
Prompt.) A disk operating system (DOS) window displays.
d. Delete the product’s old IP address from the ARP table. At the command
(C:\) prompt, type arp -d xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx is the old IP address for the product.
e. Click close (X) at the upper right corner of the DOS window to close the
window and return to the Windows desktop.