embedded web server user guide

2–16 embedded web server user guide
Configuring the Product
a. Click the Enable Authorization Traps field to enable authorization trap
messages to be sent to SNMP management stations when unauthorized
stations try to access SNMP information from the product.
b. For each trap recipient to be configured, type a community name of 32
alphanumeric characters or less in the Community Name field. The
community name is incorporated in SNMP trap messages to prevent
unauthorized viewing or use.
c. Click the check box in the Write Authorization column to enable or disable
write authorization for the trap recipient (default is disabled). A check mark
indicates write authorization is enabled. When the feature is enabled, a
management workstation user can change sysContact, sysName, and
sysLocation SNMP variables.
d. Type the IP address or DNS host name of the trap recipient (SNMP
management workstation) in the Trap Recipient field in four-byte,
dotted-decimal format. It is recommended the IP address be used.
e. The default UDP port number for trap recipients is 162. Type a decimal port
number in the UDP Port Number field to override the default value.
3. Click Activate to save and activate the changes. The message Your changes
to the SNMP configuration have been successfully
activated displays.