embedded web server user guide

embedded web server user guide 2–17
Configuring the Product
Enabling or Disabling the CLI
Perform this procedure to enable or disable the state of the product’s command line
interface (CLI). To change the CLI state:
1. Choose Configure from the navigation panel.
2. Click the Management tab and the CLI tab. The CLI tab view displays
(Figure 2–9).
Figure 2–9: Disabling the CLI
3. Perform one of the following steps as required:
a. Click Enable to activate the CLI. The message Your changes
to the CLI enable state have been successfully
activated displays.
b. Click Disable to deactivate the CLI. The message Your changes to
the CLI enable state have been successfully
activated displays.