embedded web server user guide

embedded web server user guide 2–23
Configuring the Product
After obtaining the feature key, install the feature as follows:
1. Choose Operations from the navigation panel. The Operations page opens.
2. Click the Feature Installation tab. The Feature Installation tab view displays
(Figure 2–12).
Figure 2–12: Feature installation tab view
3. Type the feature key and click Activate. The interface displays a confirmation
page with a warning, stating this action overrides the current set of product
features.
NOTE: When Activate is selected, all current features are removed and replaced with the
features specified in the feature key. Features not included in the new feature key are no longer
available on the system. Because of this, it is important to verify that the feature key enables all
desired features.
4. Click Activate to activate the new feature key.
5. If you receive an error message, Error 238, Invalid Key, this means that
either the feature key was entered incorrectly or the feature key is not a valid key
for that feature. Re-enter the feature key. If you continue to have problems, contact
technical support.