embedded web server user guide

4–6 embedded web server user guide
Viewing Product and Fabric Data
The Port Properties page provides the following information:
• Port Number — The physical port number.
• Port Name — User-defined port name or description.
• Type
— G_port — Displays if nothing is logged into the port.
— F_Port — Displays if a device is logged into the port.
— E_Port — Displays if the port is connected to another switch’s E_Port
through an ISL.
— GX_Port — Valid only on the Edge Switch 2/24; allows a port to operate as
either a Fabric Loop Port, Fabric Port, or an Expansion Port.
— FX_Port — Valid only on the Edge Switch 2/24; restricts a port to operate as
either a Fabric Loop Port or a Fabric Port.
• Operating Speed — This field displays the current data speed for the port as 1
Gb/sec, 2 Gb/sec, or Not Established. Not Established displays if Negotiate is
defined as the operating speed and the data speed has not been resolved between
the port and the attached device, or if the port and device are not communicating.
Note that 2Gb/sec and Not Established can display only on machines that
support 2 Gbps speeds.
• Port WWN — The port’s 16-digit WWN.
• Attached Port WWN — Fibre Channel WWN identifier of the device attached to
the port.
• Block Configuration — Indicates whether the port is blocked or unblocked.
• Beaconing — This field indicates the beaconing status for the port.
• FAN Configuration — This field indicates the FAN status for the port. This field
is valid only on the Edge Switch 2/24.
• Operational State — Inactive, invalid attachment, link incident, no light, not
operational, online, offline, port failure, segmented E_Port, testing, or not
installed.