embedded web server user guide

embedded web server user guide 4–11
Viewing Product and Fabric Data
Viewing Operating Parameters for the Product
To view the Operating Parameters of a product, perform the following procedure:
1. Choose View from the navigation panel.
2. Choose the Operating Parameters tab. The Operating Parameters tab view
displays (Figure 4–5) showing Switch Parameters and Fabric Parameters.
Figure 4–5: Operating Parameters tab view
This page shows the following Switch Parameters information for the product:
• Preferred Domain ID — The ID to be used if the product participates in a
multiswitch fabric. The preferred domain ID must be unique for each Director and
Switch in a fabric.
• Active Domain ID — The domain ID assigned to the switch.
• FC Address Domain ID — The Fibre Channel domain ID.
• Insistent Domain ID — Indicates whether the domain ID is enabled to be
insistent. The Insistent Domain ID cannot be enabled unless the SANtegrity
feature is installed.