embedded web server user guide

embedded web server user guide 5–5
Monitoring Products
Traffic Transmit and Receive Statistics
The Traffic Statistics include these transmit and receive values.
• Frames Rx — Number of frames that the port has received.
• Frames Tx — Number of frames that the port has transmitted.
• Four byte words Rx — Number of words that the port has received.
• Four byte words Tx — Number of words that the port has transmitted.
• Offline sequences Rx — Number of offline sequences (OLS) received by this
port.
• Offline sequences TX — Number of offline sequences (OLS) transmitted by this
port.
• Link resets Rx — Number of link reset protocol frames received by this port
from the attached N_Port.
• Link resets TX — Number of link reset protocol frames transmitted by this port
to the attached N_Port.
• Link utilization % Rx — Current link utilization for the port expressed as a
percentage. On 1 Gbps links, ports can transmit or receive data at 100 MB per
second. On 2 Gbps links, ports can transmit or receive data at 200 MB per second.
Link utilization is calculated over one-second intervals.
• Link utilization % TX — Current link utilization for the port expressed as a
percentage. On 1 Gpbs links, ports can transmit or receive data at 100 MB per
second. On 2 Gbps links, ports can transmit or receive data at 200 MB per second.
Link utilization is calculated over one-second intervals.
For the Edge Switch 2/24, the following statistics are also shown:
• LIPs Detected — A loop initialization primitive (LIP) was detected, which means
the loop was completed.
• LIPs Generated — A loop initialization primitive was created to initialize a loop.