embedded web server user guide

6–6 embedded web server user guide
Operating and Managing Products and Parts
Figure 6–4: Setting individual port beaconing on or off
Resetting Ports
Choose Operations from the navigation panel. Choose the Port tab and the Reset tab;
the Reset tab view displays (Figure 6–5 on page 6-7). Use this page to reset ports. If a
product is attached to the port and is online, this operation sends a link reset to the
attached product; otherwise, this action disables port beaconing on the port. If the port
is in a failed state, such as after failing a loopback test, the reset restores the port to an
operational state and clears the service required (amber) LED. The reset does not
affect other ports in the product.
To reset a port, click once in the box for that port's row, so that a check mark displays.
When you have selected all ports to reset, click Activate. A message displays
confirming that the operation has completed. For the Director 2/140, the ports are
displayed through several pages in groups of 32. To reset the ports, make sure you go
through each set of ports.