958-000289-001, June 2003)

Installing and Configuring the Director 2/64

105Director 2/64 Installation Guide

■ Tx Throughput—An alert will occur if the threshold set for transmit

throughput is reached.

■ Rx or Tx Throughput—An alert will occur if the threshold set for either

receive or transmit throughput is reached.

5. Click Next. A new screen displays with additional parameters, as shown in

Figure 49. The name configured for the alert displays at the top of the screen.

Note: Click Previous if you need to return to the previous screen.

Figure 49: New Threshold Alerts dialog box—second screen

6. Enter a percentage from 1 through 100 for % utilization. When throughput

reaches this percentage of port capacity, a threshold alert will occur.

7. Enter the amount of cumulative minutes in which the % utilization should

exist during the notification interval before an alert is generated. You can also

choose At any time if you want an alert to occur whenever the set %

utilization is reached. The valid range is from 1 to the interval value set in

step 8.

8. Enter the interval in minutes in which throughput is measured and threshold

notifications can occur. The valid range is 5 minutes to 70,560 minutes.