958-000289-001, June 2003)

Regulatory Compliance Notices

134 Director 2/64 Installation Guide

Laser Safety

WARNING: To reduce the risk of exposure to hazardous radiation:

• Do not try to open the laser device enclosure. There are no user-serviceable

components inside.

• Do not operate controls, make adjustments, or perform procedures to the laser

device other than those specified herein.

• Allow only Hewlett-Packard authorized service technicians to repair the laser

device.

Certification and Classification Information

This product contains a laser internal to the Optical Link Module (OLM) for

connection to the Fibre communications port.

In the USA, the OLM is certified as a Class 1 laser product conforming to the

requirements contained in the Department of Health and Human Services (DHHS)

regulation 21 CFR, Subchapter J. The certification is indicated by a label on the

plastic OLM housing.

Outside the USA, the OLM is certified as a Class 1 laser product conforming to

the requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including

Amendment 11:1996.

The OLM includes the following certifications:

■ UL Recognized Component (USA)

■ CSA Certified Component (Canada)

■ TUV Certified Component (European Union)

■ CB Certificate (Worldwide)

The following figure shows the Class 1 information label that appears on the metal

cover of the OLM housing: