958-000289-001, June 2003)

Installing and Configuring the Director 2/64

46 Director 2/64 Installation Guide

Table 3: Shipping Carton Contents for an HP 9000/10000/11000 Rack

Number Item

1 One HP StorageWorks Director 2/64 Product CD containing firmware,

license, documentation

HP StorageWorks Director 2/64 Installation Guide

3 Two Power Distribution Unit (PDU) power cords

4 Two standard AC power cords

5 Four multi-mode, short-wave loopback plugs

6 One torque driver with integrated 5/32” bit

7 One 10-foot null modem cable

8 HP 9000/10000/11000 Rack Mounting Kit containing:

■ Two front mounting brackets

■ Two rear mounting plates

■ Two rear angle brackets

9 Two shelf brackets

- Pouch containing HP 9000/10000/11000 rack mounting hardware:

■ Eight 10-32 x 0.375 in Phillips panhead screws—Installs two

shelf brackets to rails

■ Six 10-32 x 0.375 in Phillips panhead screws—Installs two front

mounting brackets to rails

■ Four 10-32 X 0.25 in Phillips countersunk screws—Installs front

brackets to switch

■ Ten 10-32 cage nuts—Secures front and rear shelf brackets.

■ Four 0-32 x 0.375 in Phillips panhead screws—Installs rear

bracket sections

■ Four 10-32 X 0.25 in Phillips countersunk screws—Installs rear

mounting plates to chassis

■ Four 10-32 X 0.375 in Phillips panhead screws—Installs two

rear angle brackets

■ Eight square alignment washers

q One cable management assembly

w HP StorageWorks Director 2/64