958-000289-001, June 2003)

Installing and Configuring the Director 2/64

77Director 2/64 Installation Guide

Figure 33: COMn Properties dialog box

7. Configure the Port Settings parameters as follows:

■ Bits per second: 115200

■ Data bits: 8

■ Parity: None

■ Stop bits: 1

■ Flow control: Hardware

8. Click OK. The HyperTerminal window displays.

9. At the > prompt, type the user-level password (the default is password) and

press the Enter key. The password is case-sensitive. The HyperTerminal

window displays with a C> prompt at the top of the window.

10. At the C> prompt, type ipconfig and press Enter. The HyperTerminal

window displays, as shown in Figure 34.

■ MAC Address

■ IP Address (default is 10.1.1.10)

■ Subnet Mask (default is 255.0.0.0)

■ Gateway Address (default is 0.0.0.0)

Only the IP Address, Subnet Mask, and Gateway Address fields are

configurable.