958-000289-001, June 2003)

Installing and Configuring the Director 2/64

80 Director 2/64 Installation Guide

HAFM Server

To run HAFM software, you must set up and configure the HAFM server.

Refer to the HAFM server installation guide for instructions on:

■ Setting up the HAFM server.

■ Connecting the HAFM server to the LAN.

■ Configuring the network addressing for the HAFM server.

■ Setting HAFM server date and time.

■ Creating HAFM user names and passwords.

Enabling HAFM to Manage the Director

To manage a new director, it must be recognized by the HAFM application.

Follow these steps to enable HAFM to recognize a new director:

1. Click the Product menu and choose New from the drop-down menu. The

New Product dialog box displays, as shown in Figure 36.

Figure 36: New Product dialog box

2. Type the IP address you configured earlier. See “Configure Director Network

Information” on page 73 for more information.

3. Choose Director-64 from the Product Type drop-down list and click OK. A

new director icon displays at the Products View page.

4. Repeat this procedure for each new director.